20170730_184034

Work has begun in earnest on filling the swamp. I had already coated the bottom with joint compound, sanded and painted it. Light green on the outside, blending to a black in the middle represent depth.

I had also fashioned a couple of industrial pipes from PVC and a prescription pill bottle and added toxic drainage. A how-to video by Wyloch can be see here: https://www.youtube.com/watch?v=S07hHjXgd60

Now it was time to add some detail to the area. I cut a dollar-store toy dinosaur in half for the “swamp monster” emerging from the pool of blech at the waterline. Paintbrush bristles and Noch static grass were glued in to represent whatever type of wild reed grows on Xenon 3. I also added part of toy dinosaur skeleton tail.

Next I poured the resin. About 20oz of both resin and hardener were enough to lay down a layer of about 1/4″ inch thick. I let it cure and harden at least 48 hours.

Next comes the magic. The resin dries incredibly clear. Every fault from the plaster and paint can be clearly seen.  The resin, as poured, needs some texture and color variation to get the light to play and bounce. This can be achieved by adding some acrylic paint to the resin pour, but it was too late for that now (note to self: add some color to the resin next time. Fluorescent or glow in the dark?)

20170802_201847

I remembered technique of making water of nothing but coats of Mod Podge by long time Model Railroader Magazine contributor Dave Frary. The effect is stunning and explained on Dave’s Youtube page here: https://www.youtube.com/watch?v=wnOE-qWhGVs

Even though the effect of building up the coast of Mod Podge is amazing, the bottom layer of paint also counts for a lot as well. Again, a lesson for the main layout, but now time to start laying down the layers. As the video states, blotching is key. Thicker layers are better, but tend to cause air bubbles, which destroy the effect.

This is a fun task where you can get a little help from your assistant. You can do at least 1 coat a day, two for the thinner ones.

20170802_201201

On the backside of the diorama, which is the underground sub station, I started placing in the various elements, The platform and bulkhead are basically finished. I tested coloring the ties white to differentiate the passenger line. I made some other pieces out of sci fi gaming textures from the Internet. I still need to add some details to get a grungy, sci-fi, post apocalyptic feel, as well as a futuristic train or locomotive, low level lighting, and passengers on the platform.

20170730_184309

Over on the main layout, it is time to start laying track. I have put in place the cornerstone pieces (basically the switches) which will key the placement of the rest of the track. There will 5 electrical blocks (standard DC block wiring), so I mocked in some curves and identified where the feeders will need to be.

20170802_201903

I drilled the holes and will start laying the track for real next week. Soon trains will be running on the Mines of Xenon!

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s